AQUAGAUGE Installation and Operating Instructions eae ee Installation Details Data Logger Differential Pressure Sensor Model Lower the pressure sensor through an appropriate opening in the tank above the water level and allow the sensor to sink to the bottom of the tank The data logger and transmitter case does not need to sit on top of the tank however it should be mounted in a position where the antenna is not obstructed Excess cable can be pushed into the tank
ELECTROSENSE AQUAGAUGE Ultrasonic Liquid Level Sensor TECHNOLOGIES Installation and Operating Instructions 1 Locate a suitable mounting point in the centre of the top of the tank and ensure that there is an opening at least 50mm in diameter to accommodate the sensor housing 2 Measure the distance between the proposed mounting point and the bottom of the tank i e distance H in diagram 2 3 Set the corresponding 6 DIP switches shown in figure 1 and diagram 1 to the