NOTES 1 If the furnace is equipped with NOx screens and is to be used with LP propane gas the screens must be removed prior to start up 2 Drip leg in the gas line must be installed 3 The furnace controls require correct polarity on the power supply and a proper ground 4 Y amp G must be connected to the control board for cooling operation 5 External filters are required on all configurations 6 Electrical or gas entry is available on both casing sides 7
Shades Technics o Cat No 746199 B1200 W Centre Sunken Toilet Cubicle Parts amp Service Manual B1200 W Centre Sunken Toilet Cubicle 1 Contents Information amp Instructions Cubicle Operating Instructions Worktop Servery Operating Instructions Cubicle Water Systems Drinking Water System Cleaning amp Hygiene Cubicle Cleaning amp Hygiene Servery Maintenance Cubicle Maintenance Servery Winterisation Jump Starting
NOTES 1 If the furnace is equipped with NOx screens and is to be used with LP propane gas the screens must be removed prior to start up 2 Drip leg in the gas line must be installed 3 The furnace controls require correct polarity on the power supply and a proper ground 4 Y amp G must be connected to the control board for cooling operation 5 External filters are required on all configurations 6 Electrical or gas entry is available on both casing sides 7
NOTES 1 If the furnace is equipped with NOx screens and is to be used with LP propane gas the screens must be removed prior to start up 2 Drip leg in the gas line must be installed 3 The furnace controls require correct polarity on the power supply and a proper ground 4 Y amp G must be connected to the control board for cooling operation 5 External filters are required on all configurations 6 Electrical or gas entry is available on both casing sides 7