USER S MANUAL AtmosLM Large Molecule Sampling Manual 1 System Set Up 2 Operation of Peristaltic Pump ERP 10 Figure 1 shows a typical AtmosLM setup A syringe pump is used to infuse One RS 5S Peristaltic Tubing can be installed on each side of the roller perfusate and the peristaltic pump is used to withdraw sample from the upper and lower Tubing Guide is the groove where the peristaltic tubing probe Always keep the peristaltic pump ERP 10 at the same level as or RT 5S
ciel PAu User s Manual AtmosLM Large Molecule Sampling Manual 1 System Set Up Figure 1 shows a typical AtmosLM setup A syringe pump is used to infuse perfusate and the peristaltic pump is used to withdraw sample from the probe Always keep the peristaltic pump ERP 10 at the same level as or not more than 50cm above the AtmosLM probe to avoid reduced flow from the outlet line of the probe Name Model Specification Syringe Pump ESP 32 1 motor 2 drive Push P